Standard Abrasives™ S/C Cross Pad 724346, 8 PLY, 2 in x 2 in x 1/2 in, 8-32, 120, 100/Carton, 1000 ea/Case

The Standard Abrasives™ Silicon Carbide Cross Pad is a versatile tool that can be used for grinding in hard-to-reach areas, as well as producing a final shine and polish. The pad is made up of strips of abrasive material that are folded over an eyelet and intersect to form a cross. The four spindles rotate as the pad spins inside pipes or tubes, allowing for swift finishing of the workpiece. The spindles are springy and buoyant enough to accommodate uniquely shaped parts without damaging the surface, and the mineral leaves a consistent scratch pattern. Cross Pads are less aggressive than square pads and are generally used for metal finishing tasks. Their small shape makes them ideally suited to get inside tubes and any other internal diameters.

The Standard Abrasives™ Silicon Carbide Cross Pad is great for finishing and polishing inside and around sharp corners and extrusions, and the mineral cuts aggressively without compromising the geometry of the part. The pad is also good for blending radii and finishing bell-mouth pieces.

The spindles on a Standard Abrasives™ Silicon Carbide Cross Pad are multi-ply, containing up to 16 layers of abrasive material. The higher the ply, or "thickness," the more aggressive and durable the pad will be; choose these pads when you're looking to deburr or grind. Lower ply abrasives tend to be more flexible and conform well to the substrate, so choose these pads when polishing or finishing. The multi-thickness of the abrasive material acts as an extra cushion, reducing the likelihood of chatter, which tends to result from too much vibration and frequency between the abrasive, tool, and workpiece.

Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.

The cross pad has a metal eyelet that attaches to a mandrel and may be used with a rotary tool. By changing mandrel length, the user may shorten or extend the pad's reach. Standard Abrasives™ Cross Pads are manufactured from a variety of minerals, including Aluminum Oxide, Zirconia, Ceramic, and Silicon Carbide (each sold separately). All minerals are securely anchored to the backing with a strong, heat-resistant resin bond. Combining cushion, flexibility, and an aggressive cut, these well-rounded abrasive products offer outstanding versatility.

The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on its broad offering of high-performance products, including coated, bonded, and non-woven abrasive lines.